Project Coordinator 4.1: Implementation of Lasers and Measuring Techniques
Development of advanced ultrashort pulse lasers, amplifiers, and parametric devices operating in the near- and mid-IR wavelength ranges including components and complete systems for direct implementation within other projects at MBI.
An example is the development of novel CPA laser sources emitting around 2 µm wavelength. This laser system operating at kilohertz repetition rate will serve as driver for OPCPA in the mid-IR. Figure (a) shows the simulated bifurcation diagram of a Ho:YLF regenerative amplifier (RA) at a 1 kHz repetition rate and 24 round trips indicating the most interesting operation regimes, i.e., stable double-pulsing (yellow coded bar) and the single-energy regime (green coded bar) beyond the final bifurcation point (BP final). Based on our model the RA is designed for operation in the single-energy regime beyond BPfinal. The measured complete RA bifurcation diagram of the re-designed RA at 1 kHz and 24 round trips is presented in Fig. (b). It agrees well with our numerical simulations [Fig. (a)]. Only the predicted multi-pulsing between 20 and 30 W pump power is less pronounced in the experiment. The highest pulse energy of 12 mJ can be extracted in the stable double-pulsing regime in the upper bifurcation branch (yellow coded bar), however at 0.5 kHz, the half of the repetition rate. BPfinal appears at a pump power of 47 W and denotes the transition to the single-energy regime where any multi-stabilities and chaotic behavior have been overcome. The extracted RA pulse energy of 9.7 mJ is the by far highest reported for 2-µm RAs operating in the single-energy regime. Taking into account the applied pump power of 50 W, the extraction efficiency is as high as 19.5%. Performing the transition from the stable double-pulsing to the single-energy regime, the RA’s pulse-to-pulse stability is further improved with a rms value <0.5%. Figure (c) shows the corresponding pulse stability measurement in the vicinity of BPfinal and beyond in the single-energy regime (green coded bar).
since 1992 Max Born Institute for Nonlinear Optics and Short Pulse Spectroscopy, Berlin, Germany, staff scientist and project coordinator.
1993 - 1996 Ph.D. thesis at the Optical Institute, Technical University Berlin, Germany, with Prof. Horst Weber,
Title of thesis: Fiber bundle lasers with high average power,
1989 - 1992 Institute of Nonlinear Optics and Short Pulse Spectroscopy, Berlin, Germany, staff scientist,
1986 - 1989 Institute of Mechanics, Chemnitz, Germany, staff scientist,
1981 - 1986 Diploma degree in Physics; Physics Department, University of Jena, Germany,
Title of thesis: Characterization of lattice distorsions in LiF crystals,
- Monoclinic zinc monotungstate Yb3+,Li+:ZnWO4: Part II. Polarized spectroscopy and laser operation Journal of Luminescence 231 (2021) 117811/1-12
- Growth, spectroscopy and laser operation of monoclinic Nd:CsGd(MoO4)2 crystal with a layered structure Journal of Luminescence 231 (2021) 117793/1-10
- Tm3+ and Ho3+ colasing in in-band pumped waveguides fabricated by femtosecond laser writing Optics Letters 46 (2021) 122-125
- Compact high-flux hard X-ray source driven by femtosecond mid-infrared pulses at a 1 kHz repetition rate Optics Letters 46 (2021) 210-213
- Disordered Tm3+,Ho3+-codoped CNGG garnet crystal: Towards efficient laser materials for ultrashort pulse generation at ~2 μm Journal of Alloys and Compounds 853 (2021) 157100/1-15
- Multi-watt continuous-wave and passively Q-switched Tm:CaYAlO4 micro-lasers SPIE Proceedings Series 11259 (2020) 1125927/1-7
- 73-fs SESAM mode-locked Tm,Ho:CNGG laser at 2061 nm SPIE Proceedings Series 11259 (2020) 1125929/1-6
- Growth, spectroscopy and laser operation of Yb3+,Na+/Li+-codoped CNGG-type garnets promising for ultrafast lasers SPIE Proceedings Series 11259 (2020) 1125911/1-6
- SWCNT-SA mode-locked Tm:LuYO3 ceramic laser delivering 8-optical-cycle pulses at 2,05 µm Optics Letters 45 (2020) 459-462
- Fluorite-type Tm3+:KY3F10: A promising crystal for watt-level lasers at ∼1.9 μm Journal of Alloys and Compounds 813 (2020) 152176/1-8